5-34 Phaser 3250 Laser Printer Service Manual
Print-Quality Troubleshooting
Blank Page (2)
The entire image area is blank. One or several blank pages are printed, or
when the printer is turned On, several blank pages are printed.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Main Controller Board, PL1.1.2
■ Print Cartridge, PL1.1.20
■ Pick-Up Solenoid, PL6.1.37
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Clean the ground terminals on the
Print Cartridge and inside of the
printer.
2.Does the error still occur?
Go to step 2. Complete.
2 1.Check the Pick-Up Solenoid for
correct installation. Reseat the Pick-
Up Solenoid (page 8-39).
2.Does the error still occur?
Replace the
Pick-Up
Solenoid
(
page 8-39).
Go to step 3.
3 1.Check the Main Controller Board for
correct installation. Reseat the Main
Controller Board (page 8-62).
2.Does the error still occur?
Replace the
Main Controller
Board
(
page 8-62).
Complete.