Xerox Phaser 3250 - Empty Actuator (PL6.1.84)

Phaser 3250 Laser Printer Service Manual 8-53
Service Parts Disassembly
Empty Actuator (PL6.1.84)
Caution
Do not expose the Print Cartridge to light for more than 5 minutes. Cover the
Print Cartridge to avoid damage.
Do not touch the green surface underneath the Print Cartridge.
1. Remove Tray 1.
2. Open the Front Cover.
3. Remove the Print Cartridge (page 8-10).
4. Remove the Front Cover (page 8-27).
5. Remove the Duplex Unit (page 8-37).
6. Remove the Rear Cover (page 8-28).
7. Remove the Top Cover (page 8-29).
8. Remove the Left Cover (page 8-32).
9. Remove the Drive Assembly (page 8-60).
10. Remove the Feed Roller (page 8-43).
11. Slide the Empty Actuator out from the Feed Roller.
s3250-150