Xerox Phaser 3250 - Feed Roller (Registration Roller) (PL6.1.20)

8-40 Phaser 3250 Laser Printer Service Manual
Service Parts Disassembly
Feed Roller (Registration Roller) (PL6.1.20)
Caution
Do not expose the Print Cartridge to light for more than 5 minutes. Cover the
Print Cartridge to avoid damage.
Do not touch the green surface underneath the Print Cartridge.
1. Remove Tray 1.
2. Open the Front Cover.
3. Remove the Print Cartridge (page 8-10).
4. Remove the Front Cover (page 8-27).
5. Remove the Duplex Unit (page 8-37).
6. Remove the Rear Cover (page 8-28).
7. Remove the Top Cover (page 8-29).
8. Remove the Left Cover (page 8-32).
9. Remove the Right Cover (page 8-34).
10. Remove the Drive Assembly (page 8-60).
11. Remove the Registration Clutch (page 8-38).
12. Remove the Idle Gear (PL6.1.34) and the RDCN 24/19 Feed Gear
(PL6.1.35).
13. Remove the Pick-Up Solenoid (page 8-39).
14. Remove the HVPS (page 8-64).
15. Remove the LVPS (page 8-67).
16. Remove the LVPS Shield (page 8-69).
17. Remove 3 screws securing the Swing Bracket (PL6.1.16).
18. Remove the Swing Bracket.
1
3
2
s3250-109