Xerox Phaser 3250 - Ghosting (3)

5-24 Phaser 3250 Laser Printer Service Manual
Print-Quality Troubleshooting
Ghosting (3)
There is ghosting at 62.8 mm or 77.6 mm intervals.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
■ Verify the paper is within the printer specifications (refer to “Media and
Tray Specifications” on page 1-18).
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Fuser, PL9.1.0
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Check the Fuser.
2.Is there any contamination on the
Fuser?
Clean the Fuser. Replace the
Fuser
(page 8-13).
Residual Image/Ghosting