Xerox Phaser 3250 - Blank Page (1)

Phaser 3250 Laser Printer Service Manual 5-33
Print-Quality Troubleshooting
Blank Page (1)
The entire image area is blank.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
■ Check to ensure that there is nothing blocking the Laser windows.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Main Controller Board, PL1.1.2
■ Print Cartridge, PL1.1.20
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Clean the ground terminals on the
Print Cartridge and inside of the
printer.
2.Does the error still occur?
Go to step 2. Complete.
2 1.Check the Main Controller Board for
correct installation. Reseat the Main
Controller Board (page 8-62).
2.Does the error still occur?
Replace the
Main Controller
Board
(
page 8-62).
Complete.
Blank Print