1-8 Phaser 3250 Laser Printer Service Manual
General Information
Printer Options
The Phaser 3250 printer options include:
■ Additional Memory (128 MB)
■ 250-Sheet Feeder (Tray 2)
Additional Memory
The standard 32 MB memory is soldered on board. The printer features one
memory slot that supports a 128 MB for a maximum of 160 MB. Memory
modules must meet the following characteristics:
■ 200 Pin DDR2 DIMM (8 chip type)
■ Unbuffered, Non-parity
The printer’s Configuration page lists the amount of RAM installed in the
printer.
Optional 250-Sheet Feeder (Tray 2)
The Optional 250-Sheet Feeder increases the input capacity of the printer and
can be attached to the printer underneath Tray 1. The Optional 250-Sheet
Feeder is customer installable.
Only one Optional 250-Sheet Feeder is supported.
To Next Page
Loading...
