Phaser 3250 Laser Printer Service Manual 1-17
General Information
Mounting Surface Specifications
These specifications apply to any printer used as a table-top printer.
1. In order to function properly, the printer must be placed on a surface with
the following minimum dimensions.
2. Mounting surface flatness must be within the specified range. The printer
must not be tipped or tilted more than 2 mm.
Failure to adhere to the specified mounting specifications will void all
guarantees of print-quality and/or performance.
s3250-009
100 mm
(3.9 in.)
100 mm
(3.9 in.)
100 mm
(3.9 in.)
482.6 mm (18.8 in.)
To Next Page
Loading...
