Xerox Phaser 3250 - Exit Guide; Rear Guide Assembly (PL6.1.114)

Phaser 3250 Laser Printer Service Manual 8-59
Service Parts Disassembly
Exit Guide
Rear Guide Assembly (PL6.1.114)
Warning
The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes
for the Fuser to cool before performing the procedures.
1. Remove the Duplex Unit (page 8-37).
2. Open the Rear Cover (PL5.1.0).
3. Open the Rear Guide Assembly.
4. Push the Rear Guide Assembly toward one side to release the notch from
the printer frame.
5. Slide the Rear Guide Assembly out to remove the Guide Assembly.
s3250-124