Phaser 3250 Laser Printer Service Manual 8-21
Service Parts Disassembly
11. Release the latch to remove the Left Lamp Cap (PL9.1.31).
12. Use a pair of pliers to unhook the left and right ES Springs (PL9.1.29)
securing the Fuser Frame (PL9.1.20) and the Fuser Cover (PL9.1.1).
13. Remove the Pressure Roller #2 (page 8-22).
14. On the wide open side of the Fuser Frame (PL9.1.20), slide the Pressure
Roller out from the Fuser Frame. On the small open side of the Fuser
Frame, slide the Pressure Roller out from the Bushing (PL9.1.22).
To Next Page
Loading...
