Xerox Phaser 3250 - Page 99

3-8 Phaser 3250 Laser Printer Service Manual
Error Messages and Codes
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Check the Pick-Up Solenoid for
damage.
2.Is the Pick-Up Solenoid damaged?
Replace the
Pick-Up
Solenoid
(
page 8-39).
Go to step 2.
2 1.Check the Paper Holder Pad on the
paper tray (page 8-8).
2.Is the Paper Holder Pad loose due
bad sealing of the side-pad?
Replace the
Paper Holder
Pad (
page 8-8).
Go to step 3.
3 1.Check the surface of the Pick-Up
Roller for damage or debris. Wipe
the Pick-Up Roller using a damp
cloth.
2.Is the Pick-Up Roller damaged?
Replace the
Pick-Up Roller
(
page 8-11).
Go to step 4.
4 1.Check the Feed Sensor for damage.
2.Is the Feed Sensor damaged?
Replace the
Feed Sensor
(
page 8-49).
Replace the
Main Controller
Board
(
page 8-62).