FEATURES
1-29
2. The ABS warning light comes on while the “ ” side of the start/engine stop switch is being pushed.
When the engine is being started, the ABS warning light comes on while the “ ” side of the start/en-
gine stop switch is being pushed. (Refer to “ELECTRIC STARTING SYSTEM” on page 8-7.)
3. The ABS warning light comes on while riding.
If the ABS warning light comes on while riding, a malfunction has been detected in the ABS. The
ABS hydraulic control will not be performed. The ABS will have recourse to manual braking if this
occurs.
4. The ABS warning light flashes while riding.
If the ABS warning light flashes while riding, there is no problem with the function of the ABS. How-
ever, the ABS ECU input has unstable factors. (For details, refer to “ABS TROUBLESHOOTING
OUTLINE” on page 8-131.)
The ABS warning light comes on or flashes if the vehicle is ridden with the test coupler adapter con-
nected to the ABS test coupler.
bc d
e
a
f
iff
h
g
a. ABS warning light
b. Main switch “OFF”
c. Main switch “ON”
d. Start switch “ON”
e. Start switch “OFF”
f. Goes off
g. Comes on
h. ABS self-diagnosis finishes when the vehicle
is ridden at a speed of approximately 10 km/h
(6 mph) (Refer to “ABS warning light” on page
1-20.)
i. Comes on while the “ ” side of the
start/engine stop switch is being pushed
a. ABS warning light
b. Comes on