CRUISE CONTROL SYSTEM
8-100
EAS1MC1018
[B-2] DIAGNOSIS USING THE MALFUNCTION HISTORY CODES
Execute the diagnostic mode (code No. 61) to check the malfunction history.
• Refer to “DIAGNOSTIC MODE” on page 8-37.
• Malfunction history is displayed in the multi-function meter unit right display. [B-3]
• Malfunction history is not displayed in the multi-function meter unit right display. [B-4]
EAS1MC1019
[B-3] MALFUNCTION HISTORY IS DISPLAYED
1. Information for the fault codes.
Refer to “TROUBLESHOOTING DETAILS” on page 8-40.
7 Defective cruise control
switch.
Replace the left handlebar
switch.
Turn the main switch to “ON”.
Push the “RES+” side and
“SET–” side of the cruise
control setting switch.
Fault code number is not dis-
played → Service is finished.
Fault code number is dis-
played → Go to item 8.
8 Malfunction in ECU. Replace the ECU.
Refer to “REPLACING THE
ECU (engine control unit)” on
page 8-174.
Fault code No. 91
Item
A
Cruise control setting switch “RES+”: open or short circuit is de-
tected.
B
Cruise control setting switch “SET–”: open or short circuit
is detected.
To Next Page
Loading...
