4-39
CLUTCH
ENG
NOTE:
NOTE:
5. Inspect:
Primary drive gear teeth
Wear/damage Replace the clutch
housing.
6. Check:
Circumferential play
Free play Replace the clutch housing.
7. Inspect:
Clutch spring
Damage Replace the clutch spring.
8. Measure:
Clutch spring free length
Out of specification Replace the clutch
springs as a set.
Free length (clutch spring):
39.5 mm
<Wear limit>: 38.5 mm
9. Inspect:
Dogs (on the clutch housing)
Pitting/wear/damage Deburr or re-
place.
Clutch housing bearing
Wear/damage Replace the clutch housing.
Pitting on the clutch housing dogs will cause er-
ratic operation.
10. Inspect:
Clutch boss splines
Pitting/wear/damage Replace the
clutch boss.
Pitting on the clutch boss splines will cause er-
ratic operation.
11. Inspect:
Pressure plate
Cracks/damage Replace.