3-42
BATTERY INSPECTION/
FUSE INSPECTION
INSP
ADJ
NOTE:
CAUTION:
CAUTION:
*****************************************************
5. Inspect:
S Battery terminals
Dirty Clean with a wire brush.
Poor connection Correct.
After cleaning the terminals, apply a light coat of
grease.
6. Install:
S Battery
S Battery band
7. Connect:
S Battery leads
First, connect the positive lead
1
, then con-
nect the negative lead
2
.
8. Install:
S Rider’s seat
Refer to “FUEL TANK AND SEATS”.
EB305010
FUSE INSPECTION
When checking or replacing the fuse always
turn off the main switch. Otherwise, a short
circuit may occur.
1. Remove:
S Battery cover
2. Inspect:
S Fuses
Inspection steps:
D Connect the pocket tester and check the fuse
for continuity.
To Next Page
Loading...
