Yamaha XVS6501997 - Front Wheel Assembly; Front Wheel Installation

6-5
FRONT WHEEL AND BRAKE DISC
CHAS
*****************************************************
*****************************************************
NOTE:
CAUTION:
23 Nm (2.3 mSkg)
NOTE:
NOTE:
59 Nm (5.9 mSkg)
NOTE:
20 Nm (2.0 mSkg)
FRONT WHEEL ASSEMBLY
1. Install:
S Collar
S Bearings
S Oil seals
Installation steps:
D Install the new bearings and oil seals by re-
versing the removal steps.
Use a socket
1
that matches the diameter of
the outer bearing race and the oil seal.
Do not contact the bearing center race
2
or
balls
3
. Contact should be made only with
the outer race
4
.
FRONT WHEEL INSTALLATION
1. Install:
S Brake disc
1
D Apply LOCTITE

to the threads of the brake
disc bolts.
D Tighten the brake disc bolts in stages using a
crisscross pattern.
2. Install:
S Speedometer gear unit
1
Be sure that two projections
a
inside the wheel
hub mesh with the two slots
b
in the gear unit
assembly.
3. Tighten:
S Front wheel
S Front wheel axle
Be sure that the projection (torque stopper)
a
of the gear unit housing is positioned correctly.
S Axle pinch bolt