6-27
REAR WHEEL AND REAR BRAKE
CHAS
*****************************************************
*****************************************************
NOTE:
CAUTION:
3. Measure:
S Brake drum inside diameter
a
Out of specification Replace the wheel.
Brake drum inside diameter:
200 mm
Wear limit:
201 mm
4. Inspect:
S Brake drum inner surface
Oil/scratches Repair.
Oil
Use a rag soaked in lacquer
thinner or solvent.
Scratches
Use an emery cloth (polish
lightly and evenly)
5. Inspect:
S Camshaft face
Wear Replace.
REAR WHEEL ASSEMBLY
1. Install:
S Spacer
S Collar
S Bearings
Installation steps:
D Install the new bearings by reversing the re-
moval steps.
Use a socket
1
that matches the diameter of
the outer bearing race and the oil seal.
Do not contact the bearing center race
2
or
balls
3
. Contact should be made only with
the outer race
4
.
To Next Page