3-33
TIRE INSPECTION
INSP
ADJ
D Tire inflation pressure should only be
checked and adjusted when the tire tem-
perature equals the ambient air tempera-
ture. Tire inflation pressure and suspen-
sion must be adjusted according to the
total weight of the cargo, rider, passenger
and accessories (fairing, saddlebags,
etc.if approved for this model), and ac-
cording to whether the motorcycle will be
operated at high speed or not.
NEVER OVERLOAD THE MOTORCYCLE.
D Operation of an overloaded motorcycle
could cause tire damage, an accident or
injury.
Basic weight:
With oil and
full fuel tank
227 kg
Maximum
load*:
180 kg (except for CH)
178 kg (for CH)
Cold tire
pressure:
Front Rear
Up to 90 kg
load*
200 kPa
(2.00 kgf/cm
2
,
2.00 bar)
225kPa
(2.25 kgf/cm
2
,
2.25 bar)
90 kg
maximum
load*
200 kPa
(2.00 kgf/cm
2
,
2.00 bar)
250 kPa
(2.50 kgf/cm
2
,
2.50 bar)
High speed
riding
200 kPa
(2.00 kgf/cm
2
,
2.00 bar)
250 kPa
(2.50 kgf/cm
2
,
2.50 bar)
* Load is the total weight of the cargo, rider,
passenger and accessories.
2. Inspect:
S Tire surfaces
Wear/damage Replace.
Minimum tire tread depth:
(front and rear):
1.6 mm
1
Tread depth
2
Side wall
3
Wear indicator
To Next Page