7 218IF Module
7.5.5 Transmission Parameter Settings
7-20
Local Station and TCP/IP Settings
Local Station and TCP/IP Setting Procedure
The local station and TCP/IP setting procedure is shown below.
1. Click Edit (E
) and then This Station Settings and TCP/IP Setting (M) on the CP-218
Transmission Definitions menu.
2. Set each item in the dialog box and then click the OK button.
Local Station Settings
1. Subnet Mask
Enter a subnet mask for the local station’s IP address. When a subnet mask is not being
used, enter 0 in fields 1 to 4.
The IP address consists of a 32-bit string. A period (.) separates each of the four 8-bit
segments of the address, and each segment is expressed in decimal.
Subnet Mask
A subnet mask is a bit pattern used to define the number of valid bits in the network address shown in
the IP address. Check with the network administrator.
1.
2.
3.
4.
5.
6.
7.
8.
Field No. 4: 0 to 255
Field No. 3: 0 to 255
Field No. 2: 0 to 255
Field No. 1: 0 to 255
255. 255. 255. 0.
Setting Example
TERMS
To Next Page
Loading...
