5 215IF Module
5.5.4 Setting CP-215 Transmission Definitions
5-24
5. REG-No., SIZE
Set the leading register number (I register number) and amount of I/O data. Input an O
register number for the local station.
Be sure that the registers set for each station does not overlap with the register numbers
for another station.
6. SCAN
Select the transmission processing scan that services I/O.
• HIGH: High-speed scan
• LOW: Low-speed scan
7. Station Name (Comment)
Comments up to 32-characters long can be input for each station.
Deleting Assignment Data
Use the following procedure to delete the assignment data for one station.
1. Move the cursor to the desired row.
2. Click Edit (E
) and then Assignment Delete (D) on the menu. The assignment data
selected in step 1. will be deleted.
CP-316H CP-316H
CP-916G CP-916G
ACGC4000 ACGC4000
CP-517 CP-517
MP920 MP920
CP-902 CP-902
215IF/INV 215IF/INV
RIO-05 RIO-05
RIO-2000 RIO-2000
RIO-120 RIO-120
(cont’d)
Selected Item I/O Device Name
To Next Page
Loading...
