YASKAWA SGD7S series - Page 627

Revision History-1
Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of
Publication
Rev.
No.
Web
Rev.
No.
Section Revised Contents
September 2016 <8> 0 All chapters Addition: Information on Direct Drive Servomotors (SGM7E)
Preface Partly revised.
2.1.3, 4.2, 4.5 Revision: “Linear Servomotor overheat protection signal input” changed to
“overheat protection input.”
3.7 Addition: EMC installations for single-phase 200-VAC and single-phase 100-
VAC models.
6.18, 8.12.3 Newly added.
Chapter 12 Addition: A.862 and A.93B
Chapter 14 Addition: Pn022, Pn475, Pn476, Pn61A, Pn61B, Pn61C, and Pn61D
15.2.2 Addition: Un02F
April 2016 <7> 0 All chapters Addition: Information on SGM7F Direct Drive Servomotors
Deletion: Information on SGLC Linear Servomotors
Preface, 9.1, 9.2 Partly revised.
2.1.1. Addition: Information on input current of control power supply
Chapter 14 Deletion: Pn52D
November 2015 <6> 0 All chapters Addition: Information on SERVOPACKs with single-phase, 100-VAC power sup-
ply inputs
Preface Revision: Information on certification for standards
4.4.3, 5.16.1,
6.8.1
Addition: Information on SQ10 Linear Encoder from Magnescale Co., Ltd.
October 2015 <5> 0 All chapters Revision: Information on SigmaWin+ procedures
Preface,
Chapter 1
Addition: Information on SGMMV Rotary Servomotors
Preface, 9.4.1 Partly revised.
1.5.2 Addition: Information on Direct Drive Servomotors (SGMCV-16D and -35D).
9.5 Newly added.
Chapter 12 Addition: A.bF5, A.bF6, A.bF7, A.bF8, and FL-6
Back cover Revision: Address
April 2015 <4> 0 All chapters Addition: Information on dynamic brake option
Preface, 7.6.3,
8.3.3, 8.3.5,
12.3.2
Partly revised.
12.2.2, 12.4,
14.1.2
Revision: Reference information
14.1.2 Revision: Information on Pn601 and Pn604
Front cover, back
cover, spine
Revision: Format
MANUAL NO. SIEP S800001 26C <2>-1
Published in Japan September 2014
Date of publication
Revision number
WEB revision number