YASKAWA SGD7S series - Page 628

Revision History-2
March 2015 <3> 0 All chapters Addition: Information on SERVOPACKs with single-phase, 200-VAC power sup-
ply input
Addition: Information on BTO specification
Addition: Information on Safety Modules
Partly revised.
Preface Addition: Information on dynamic brake
Revision: Information on certification for standards
2.1.1 Revision: Power loss
2.3.2 Addition: Information on duct-ventilated SERVOPACKs
Revision: External dimensions of the following three-phase, 200-VAC SERVO-
PACKs: SGD7S-470A, -550A, -590A, and -780A.
4.3.5 Revision: Illustration of SGD7S-470A, -550A, -590A, and -780A SERVOPACKs.
4.2, 4.4.3, 4.5.3,
6.12.1
Addition: Information on Battery for absolute encoder
5.16.1, 5.18.1 Addition: Information on Linear Encoders (ST1381 and ST1382) from Mitutoyo
Corporation
8.12.3, 14.1.2 Revision: Information on Current Control Mode Selection
Back cover Revision: Address
September 2014 <2> 1 12.4 Partly revised.
July 2014 0 − Based on Japanese user’s manual, SIJP S800001 26C<2> printed in July 2014.
All chapters Addition: Information on SGD7S-330A, -470A, -550A, -590A, and -780A
Addition: Information on supplementary document
(Manual No.: SIEP S800001 50)
May 2014 <1> 0 Preface Revision: Safety Parameters
3.7 Newly added.
Chapter 12 Addition: A.EC8 and A.EC9
April 2014
−−
− First edition
Date of
Publication
Rev.
No.
Web
Rev.
No.
Section Revised Contents