YASKAWA T1000A User Manual

6.3 Drive Alarms, Faults, and Errors
276 YASKAWA ELECTRIC SIEP C710616 30B YASKAWA AC Drive T1000A Technical Manual
n Auto-Tuning Errors
Table 6.12 Auto-Tuning Error Displays
n Errors and Displays When Using the Copy Function
Table 6.13 Copy Errors
Digital Operator Display
Name Page
Digital Operator Display
Name Page
LED Operator LCD Operator LED Operator LCD Operator
End1 Excessive V/f Setting 298 Er-09 Acceleration Error 299
End2
Motor Iron Core Saturation Coefficient
Error
298 Er-10 Motor Direction Error 299
End3 Rated Current Setting Alarm 298 Er-11 Motor Speed Error 299
End4
Adjusted Slip Value Fell Below Lower
Limit
298 Er-12 Current Detection Error 300
End5 Resistance Between Lines Error 298 Er-13 Leakage Inductance Error 300
End6 Leakage Inductance Alarm 298 Er-14 Motor Speed Error 2 300
End7 No-Load Current Alarm 298 Er-15 Torque Saturation Error 300
Er-01 Motor Data Error 298 Er-16 Inertia ID Error 300
Er-02 Alarm 299 Er-17 Reverse Prohibited Error 300
Er-03 STOP button Input 299 Er-18 Induction Voltage Error 300
Er-04 Line-to-Line Resistance Error 299 Er-19 PM Inductance Error 300
Er-05 No-Load Current Error 299 Er-20 Stator Resistance Error 300
Er-08 Rated Slip Error 299 Er-21 Z Pulse Correction Error 300
Digital Operator Display
Name Page
LED Operator LCD Operator
CoPy Writing parameter settings (flashing) 301
CPEr Control mode of the drive does not match 301
CPyE Error writing data 301
CSEr Error occurred in the copy function 301
dFPS Drive models do not match. 301
End Task completed 301
iFEr Communication error 301
ndAT Model, voltage class, capacity, and/or control mode differ 301
rdEr Error reading data 302
rEAd Reading parameter settings (flashing) 302
vAEr Voltage class and/or drive capacity does not match 302
vFyE Parameter settings in the drive and those saved to the copy function are not the same 302
vrFy Comparing parameter settings (flashing) 302

YASKAWA T1000A Specifications

General

Brand	YASKAWA
Model	T1000A
Category	Controller
Language	English