Zebra DS6878 - Hand-held Trigger Mode

User Preferences & Miscellaneous Digital Scanner Options 5 - 17
Hand-held Trigger Mode
Parameter # 138
Select one of the following trigger modes for the digital scanner:
• Standard (Level) - A trigger pull activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout occurs.
• Auto Aim - If the primary trigger (trigger A) is set to imager, this trigger mode turns on the laser aiming
pattern when you lift the digital scanner. A trigger pull activates decode processing. After 2 seconds of
inactivity the aiming pattern shuts off.
*Standard (Level)
(0)
Auto Aim
(9)