Zebra DS6878 - Time Delay to Presentation Sleep Mode

User Preferences & Miscellaneous Digital Scanner Options 5 - 25
Time Delay to Presentation Sleep Mode
Parameter # 662
In Presentation Mode, this parameter sets the time the digital scanner remains active before entering sleep
mode with no illumination. The digital scanner wakes when it senses motion, upon presentation of a bar code,
or a trigger pull.
NOTE Digital scanner performance is not guaranteed in dim conditions.
Disable
(0)
1 Second
(1)
10 Seconds
(10)
1 Minute
(17)
5 Minutes
(21)