CHAPTER 3 MAINTENANCE, TROUBLE-
SHOOTING & TECHNICAL
SPECIFICATIONS
Introduction
This chapter provides suggested digital scanner and cradle maintenance, troubleshooting, technical
specifications, and signal descriptions (pinouts).
Maintenance
Digital Scanner
Cleaning the exit window is required. A dirty window may affect scanning accuracy.
•
Do not allow any abrasive material to touch the window.
•
Remove any dirt particles with a damp cloth.
•
Wipe the scanner window using a tissue moistened with an approved cleanser (listed below)
•
Do not spray water or other cleaning liquids directly into the window.
The DS6878-HC design allows safe cleansing of the product plastics with a variety of cleaning products and
disinfectants. If required, wipe the digital scanner with the following list of approved cleansers:
•
Isopropyl alcohol
•
Bleach/sodium hypochlorite
•
Hydrogen peroxide
•
Gentle dish soap and water
IMPORTANT Cleansers that contain active ingredients not listed above should not be utilized on the
DS6878-HC digital scanner.
To Next Page
Loading...
