Zebra DS6878 Product Reference Guide

2 - 6 DS6878 Product Reference Guide
Hands-free Scanning
The digital scanner is in hands-free (presentation) mode when it sits in the CR0078-P cradle. In this mode the
digital scanner operates in continuous (constant-on) mode, where it automatically decodes a bar code
presented in the field of view.
To scan:
1. Ensure all connections are secure (see appropriate host chapter).
2. Present the bar code in the digital scanner field of view.
Figure 2-2 Scanning
3. Upon successful decode, the digital scanner beeps and the LED flashes green. (For more information
about beeper and LED definitions, see Table 2-1 and Table 2-2.)
Aiming
When scanning, the digital scanner projects a red laser aiming pattern which allows positioning the bar code
within its field of view. See Decode Ranges on page 2-8 for the proper distance to achieve between the digital
scanner and a bar code.
Figure 2-3 Imager Aiming Pattern

Zebra DS6878 Specifications

General

Wavelength	655 nm
Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle	-360 - 360 °
Input voltage	5 V
Bluetooth	Yes
Dimensions (WxDxH)	69 x 97 x 185 mm
Certification	FCC, RoHS
Product color	Black
International Protection (IP) code	IP43
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Cables included	USB

Weight and Dimensions

Weight	238 g