Zebra DS6878 Product Reference Guide

5 - 32 DS6878 Product Reference Guide
Continuous Bar Code Read
Parameter # 649
Enable this to report every bar code while the trigger is pressed.
Unique Bar Code Reporting
Parameter # 723
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when
Continuous Bar Code Read is enabled.
NOTE Zebra strongly recommends enabling Picklist Mode on page 5-28 with this feature. Disabling Picklist
Mode can cause accidental decodes when more than one bar code is in the imaging engine's field of view.
*Disable Continuous Bar Code Read
(0)
Enable Continuous Bar Code Read
(1)
*Disable Continuous Bar Code Read Uniqueness
(0)
Enable Continuous Bar Code Read Uniqueness
(1)

Zebra DS6878 Specifications

General

Wavelength	655 nm
Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle	-360 - 360 °
Input voltage	5 V
Bluetooth	Yes
Dimensions (WxDxH)	69 x 97 x 185 mm
Certification	FCC, RoHS
Product color	Black
International Protection (IP) code	IP43
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Cables included	USB

Weight and Dimensions

Weight	238 g