EasyManuals Logo

Zebra DS6878 Product Reference Guide

Zebra DS6878
528 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
4 - 6 DS6878 Product Reference Guide
Bluetooth
Technology Profile Support
With Bluetooth Technology Profile Support, the cradle is not required for wireless communication. The digital
scanner communicates directly to the host using Bluetooth technology. The digital scanner supports the
standard Bluetooth Serial Port Profile (SPP) and HID Profiles which enable the digital scanner to communicate
with other Bluetooth devices that support these profiles.
SPP - the digital scanner connects to the PC/host via Bluetooth and performs like there’s a serial
connection.
HID - the digital scanner connects to the PC/host via Bluetooth and performs like a keyboard.
Master/Slave Set Up
The digital scanner can be set up as a Master or Slave.
When the digital scanner is set up as a Slave, it is discoverable and connectable to other devices. When the
digital scanner is set up as a Master, the Bluetooth address of the remote device to which a connection is
requested is required. A pairing bar code with the remote device address must be created and scanned to
attempt a connection to the remote device. See the Pairing Bar Code Format on page 4-25 for information
about creating a pairing bar code.
Master
When the digital scanner is set up as a Master (SPP), it initiates the radio connection to a slave device.
Initiating the connection is done by scanning a pairing bar code for the remote device (see Pairing Bar Code
Format on page 4-25).
Slave
When the digital scanner is set up as a Slave device (SPP), the digital scanner accepts an incoming
connection request from a remote device.
NOTE The number of digital scanners is dependent on the host’s capability.

Table of Contents

Other manuals for Zebra DS6878

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra DS6878 and is the answer not in the manual?

Zebra DS6878 Specifications

General IconGeneral
Wavelength655 nm
Scanner type2D
Yaw reading angle-60 - 60 °
Decoding standards1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle-360 - 360 °
Input voltage5 V
BluetoothYes
Dimensions (WxDxH)69 x 97 x 185 mm
CertificationFCC, RoHS
Product colorBlack
International Protection (IP) codeIP43
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedUSB
Weight and Dimensions IconWeight and Dimensions
Weight238 g

Related product manuals