Zebra DS6878 - Han Xin; Han Xin Inverse

Symbologies 15 - 89
Han Xin
Parameter # 1167
To enable or disable Han Xin, scan the appropriate bar code below.
Han Xin Inverse
Parameter # 1168
Select a Han Xin inverse decoder setting:
• Regular Only - the decoder decodes Han Xin bar codes with normal reflectance only.
• Inverse Only - the decoder decodes Han Xin bar codes with inverse reflectance only.
• Inverse Autodetect - the decoder decodes both regular and inverse Han Xin bar codes.
Enable Han Xin
(1)
*Disable Han Xin
(0)
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)