USB Interface 7 - 5
USB Host Parameters
USB Device Type
Select the desired USB device type.
NOTE When changing USB Device Types, the cradle automatically restarts. The digital scanner issues a
disconnect-reconnect beep sequence.
NOTE Select IBM hand-held USB to disable data transmission when an IBM register issues a Scan Disable
command. Aim, illumination, and decoding is still permitted. Select IBM OPOS (IBM Hand-held USB with
Full Scan Disable) to completely shut off the scanner when an IBM register issues a Scan Disable
command, including aim, illumination, decoding and data transmission.
NOTE SNAPI with Imaging and SNAPI without Imaging are only supported for the CR0078-P cradle.
NOTE For a list of supported scanner functionality by communication protocol, see
Appendix G, Communication Protocol Functionality.
*USB Keyboard (HID)
IBM Table-Top USB
IBM Hand-held USB
IBM OPOS
(IBM Hand-held USB with Full Scan Disable)
To Next Page
Loading...
