Zebra DS6878 - Hands-free Mode

5 - 18 DS6878 Product Reference Guide
Hands-free Mode
Parameter # 630
In hands-free mode, the digital scanner automatically triggers when presented with a bar code. Lifting the
digital scanner causes it to behave according to the setting of the Hand-held Trigger Mode on page 5-17.
If you select Disable Hands-free Mode, the digital scanner behaves according to the setting of the Hand-held
Trigger Mode regardless of whether it is hand-held or on a countertop.
NOTE The CR0078-P cradle is required for hands-free mode.
*Enable Hands-free Mode
(1)
Disable Hands-free Mode
(0)