Symbologies 15 - 81
Composite Beep Mode
Parameter # 398
To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
GS1-128 Emulation Mode for UCC/EAN Composite Codes
Parameter # 427
Select whether to enable or disable this mode.
Single Beep After Both are Decoded
(0)
*Beep as Each Code Type is Decoded
(1)
Double Beep after Both are Decoded
(2)
NOTE For HC configurations, the default is Single Beep After Both are Decoded.
Enable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(1)
*Disable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(0)
To Next Page
Loading...
