Zebra DS6878 - Enable;Disable UPC-E1; Enable;Disable EAN-8;JAN-8

Symbologies 15 - 9
Enable/Disable UPC-E1
Parameter # 12
UPC-E1 is disabled by default.
To enable or disable UPC-E1, scan the appropriate bar code below.
Enable/Disable EAN-8/JAN-8
Parameter # 4
To enable or disable EAN-8/JAN-8, scan the appropriate bar code below.
NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Enable UPC-E1
(1)
*Disable UPC-E1
(0)
*Enable EAN-8/JAN-8
(1)
Disable EAN-8/JAN-8
(0)