Scanning 2 - 5
Scanning
To program the digital scanner, see the appropriate host chapter, Chapter 4, Radio Communications and
Chapter 15, Symbologies. (In addition to the parameters included in these chapters, user preferences and
miscellaneous digital scanner options are also available in this guide.)
Hand-held Scanning
To scan:
1. Ensure all connections are secure (see appropriate host chapter).
2. Aim the digital scanner at the bar code.
3. Press the trigger.
Figure 2-1
Scanning
4. Upon successful decode, the digital scanner beeps and the LED flashes green. (For more information
about beeper and LED definitions, see Table 2-1 and Table 2-2.)
To Next Page
Loading...
