Zebra DS6878 - IBM 468 X;469 X Host Parameters; Port Address

10 - 4 DS6878 Product Reference Guide
IBM 468X/469X Host Parameters
Port Address
This parameter sets the IBM 468X/469X port used.
NOTE Scanning one of these bar codes enables the RS-485 interface on the digital scanner.
NOTE For a list of supported scanner functionality by communication protocol, see
Appendix G, Communication Protocol Functionality.
* None Selected
Hand-Held Scanner Emulation (Port 9B)
1
Non-IBM Scanner Emulation (Port 5B)
Table-Top Scanner Emulation (Port 17)
NOTE
1
User selection is required to configure this interface and this is the most common selection.