Zebra DS6878 - Hands-free Decode Aiming Pattern

User Preferences & Miscellaneous Digital Scanner Options 5 - 35
Hands-free Decode Aiming Pattern
Parameter # 590
Select Enable Hands-free Decode Aiming Pattern to project the aiming pattern during bar code capture,
Disable Hands-free Decode Aiming Pattern to turn the aiming pattern off, or Enable Hands-free Decode
Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.This
parameter does not apply to Snapshot Mode. See Modes of Operation on page 5-15.
NOTE With Picklist Mode on page 5-28 enabled, the decode aiming pattern flashes even when the Decode Aim-
ing Pattern is disabled.
Enable Hands-free Decode Aiming Pattern
(1)
Disable Hands-free Decode Aiming Pattern
(0)
*Enable Hands-free Decode Aiming Pattern on PDF
(2)