Zebra DS6878 Product Reference Guide

Symbologies 15 - 93
1D Quiet Zone Level
Parameter # 1288
This feature sets the level of aggressiveness in decoding bar codes with a reduced quiet zone (the area in front
of and at the end of a bar code), and applies to symbologies enabled by a Reduced Quiet Zone parameter.
Because higher levels increase the decoding time and risk of misdecodes, Zebra strongly recommends
enabling only the symbologies which require higher quiet zone levels, and leaving Reduced Quiet Zone
disabled for all other symbologies. Options are:
• 0 - The digital scanner performs normally in terms of quiet zone.
• 1 - The digital scanner performs more aggressively in terms of quiet zone.
• 2 - The digital scanner only requires one side EB (end of bar code) for decoding.
• 3 - The digital scanner decodes anything in terms of quiet zone or end of bar code.
1D Quiet Zone Level 0
(0)
*1D Quiet Zone Level 1
(1)
1D Quiet Zone Level 2
(2)
1D Quiet Zone Level 3
(3)

Zebra DS6878 Specifications

General

Wavelength	655 nm
Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle	-360 - 360 °
Input voltage	5 V
Bluetooth	Yes
Dimensions (WxDxH)	69 x 97 x 185 mm
Certification	FCC, RoHS
Product color	Black
International Protection (IP) code	IP43
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Cables included	USB

Weight and Dimensions

Weight	238 g