Zebra DS6878 - Data Matrix; Data Matrix Inverse

15 - 84 DS6878 Product Reference Guide
Data Matrix
Parameter # 292
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
Parameter # 588
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.*
*Enable Data Matrix
(1)
Disable Data Matrix
(0)
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)
NOTE For HC configurations, the default is Inverse Autodetect.