7 - 14 DS6878 Product Reference Guide
USB Static CDC
When disabled, each device connected consumes another COM port (first device = COM1,
second device = COM2, third device = COM3, etc.)
When enabled, each device connects to the same COM port.
Function Key Mapping
ASCII values under 32 are normally sent as a control-key sequences (see Table 7-2 on page 7-19). When this
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
*Enable USB Static CDC
Disable USB Static CDC
*Disable Function Key Mapping
Enable Function Key Mapping
To Next Page
Loading...
