Getting Started 1 - 17
Radio Communications
The digital scanner can communicate with remote devices via Bluetooth Technology Profile Support, or by
pairing with a cradle. For radio communication parameters, detailed information about operational modes,
Bluetooth Technology Profile Support and pairing, see Chapter 4, Radio Communications.
Configuring the Digital Scanner
Use the bar codes in this manual or the 123Scan
2
configuration program to configure the digital scanner. See
Chapter 5, User Preferences & Miscellaneous Digital Scanner Options and Chapter 6, Imaging Preferences for
information about programming the digital scanner using bar code menus. Also see each host-specific chapter
to set up connection to a specific host type. See Chapter 13, 123Scan2 to configure the digital scanner using
this configuration program.
Accessories
The digital scanner and cradle accessories that are available separately include:
•
Power supplies for applications that do not supply power over the host cable. See each host interface
chapter for set up information.
•
Wall-mount bracket for mounting the cradle vertically. Refer to the CR0078-S/CR0008-S Cradle Quick
Reference Guide (p/n 72-135874-xx) for a wall mounting template and installation instructions.
•
Lanyard for wearing the digital scanner on a wrist.
Lanyard
The lanyard attaches to the inside of the digital scanner battery door latch.
Figure 1-14
Attached Lanyard
To Next Page
Loading...
Need help?
General
Weight and Dimensions
