Driver’s License Set Up (DS6878-DL) 17 - 3
Driver’s License Parsing
To enable driver's license parsing on the digital scanner, scan the Embedded Driver's License Parsing bar code.
Scan the bar codes on the following pages in the order indicating the sequence of data fields that the digital
scanner outputs. See Parsing Driver’s License Data Fields (Embedded Driver's License Parsing) on page 17-3
for more information.
Parsing Driver’s License Data Fields (Embedded Driver's License Parsing)
To begin programming a parsing rule:
1. Scan Begin New Driver’s License Parse Rule on page 17-4.
2. Scan any of the field bar codes on the following pages, or Send Keystroke (Control Characters and
Keyboard Characters) on page 17-20 to complete the parsing rule.
3. After entering the entire rule, scan Save Driver’s License Parse Rule on page 17-4 to save the rule.
To abort the programming sequence at any time during programming, scan Quit Entering Driver’s License Rule
on page 17-4. Any previously saved rule is retained.
To erase a programmed saved rule, scan Erase Driver’s License Parse Rules on page 17-4.
Embedded Driver's License Parsing Criteria - Code Type
After specifying the fields and their order for the parsed driver's license, you can also apply standard ADF rules
to the parsed data using the
Parsed Driver’s License criterion bar code in the Advanced Data Formatting
Programmer Guide.
See Embedded Driver's License Parsing ADF Example on page 17-43 for a sample ADF rule using this code
type criterion.
*No Driver’s License Parsing
Embedded Driver’s License Parsing
NOTE Only ONE driver’s license parsing rule may be stored in memory at any time. Saving a new rule replaces
the prior rule.
NOTE Only create standard ADF rules on parsed driver's license data when configured for Embedded Driver's
License Parsing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
