Zebra DS6878 - QR Code; QR Inverse

15 - 86 DS6878 Product Reference Guide
QR Code
Parameter # 293
To enable or disable QR Code, scan the appropriate bar code below.
QR Inverse
Parameter # 587
This parameter sets the QR inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular QR bar codes only.
• Inverse Only - the digital scanner decodes inverse QR bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse QR bar codes.
*Enable QR Code
(1)
Disable QR Code
(0)
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)