RS-232 Interface 8 - 9
Parity
A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host
device requirements.
•
Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an odd number of 1
bits are contained in the coded character.
•
Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure that an even number of 1
bits are contained in the coded character.
•
Select None when no parity bit is required.
Data Bits (ASCII Format)
This parameter allows the digital scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
Odd
Even
*None
7-Bit
*8-Bit
To Next Page
Loading...
