Zebra DS6878 - Wand Emulation Host Parameters; Wand Emulation Host Types; Leading Margin (Quiet Zone)

11 - 4 DS6878 Product Reference Guide
Wand Emulation Host Parameters
Wand Emulation Host Types
Select a Wand Emulation host by scanning one of the bar codes below.
Leading Margin (Quiet Zone)
Scan a bar code below to select a leading margin duration. A leading margin is the time that precedes the first
bar of the scan, (in milliseconds). The minimum allowed value is 80 msec and the maximum is 250 msec. This
parameter accommodates older wand decoders which cannot handle short leading margins.
Symbol OmniLink Interface Controller
1
Symbol PDT Terminal (MSI)
Symbol PTC Terminal (Telxon)
1
User selection is required to configure this interface and this is the most common selection.
NOTE 250 msec is the maximum value that this parameter can attain, however, 200 msec is sufficient.
*80 msec
140 msec
200 msec