Standard Default Parameters A - 5
USB Host Parameters
USB Device Type N/A USB Keyboard (HID)
7-5
Symbol Native API (SNAPI) Status Handshaking N/A Enable
7-7
USB Country Keyboard Types (Country Codes) N/A North American
7-8
USB Keystroke Delay N/A No Delay
7-10
USB CAPS Lock Override N/A Disable
7-10
USB Ignore Unknown Characters N/A Send
7-11
USB Convert Unknown to Code 39 N/A Disable
7-11
Emulate Keypad N/A Disable
7-12
Emulate Keypad with Leading Zero N/A Disable
7-12
Quick Keypad Emulation N/A Disable
7-13
USB FN1 Substitution N/A Disable
7-13
USB Static CDC N/A Enable
7-14
Function Key Mapping N/A Disable
7-14
Simulated Caps Lock N/A Disable
7-15
Convert Case N/A No Case Conversion
7-15
Beep Directive N/A Honor
7-16
Bar Code Configuration Directive N/A Honor
7-16
USB Polling Interval N/A 8 msec
7-17
RS-232 Host Parameters
RS-232 Host Types N/A Standard
8-6
Baud Rate N/A 9600
8-8
Parity Type N/A None
8-9
Data Bits (ASCII Format) N/A 8-Bit
8-9
Check Receive Errors N/A Enable
8-10
Hardware Handshaking N/A None
8-10
Software Handshaking N/A None
8-12
Host Serial Response Time-out N/A 2 sec
8-14
RTS Line State N/A Low RTS
8-15
Beep on <BEL> N/A Disable
8-15
Table A-1
Standard Default Parameters (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
