Zebra DS6878 - Device Discovery, Pairing, and Pin Entry

v
-04 Rev A 12/2013 - Update URLs.
- Remove cradle Wall Mount Bracket Template.
- Replaced parameter SSI values with attribute numbers.
- Add Apple iOS HID Feature and Android HID Feature.
- Add Secure Simple Pairing IO Capability.
- Add Connecting an iOS or Android Product With the Digital Scanner.
- Add Decode Pager Motor and
Decode Pager Motor Duration .
- Add Night Mode Trigger and Toggle.
- Change Time Delay to Reduced Power Mode to Time Delay to Hand-held Low
Power Mode.
- Update Timeout Between Decodes, Same Symbol description.
- Add Unsolicited Heartbeat Interval.
- Add Dump Scanner Parameters.
- Add Report Version.
- For USB Device Type:
- Change HID Keyboard Emulation to USB Keyboard (HID).
- Change USB OPOS Hand-held to IBM OPOS (IBM Hand-held USB with
Full Scan Disable) and added related note.
- Change CDC COM Port Emulation to USB CDC Host.
- Add SSI over USB CDC and related note.
- Update 123Scan2 chapter.
- Add Require and Suppress to OCR chapter.
- Add OCR-B Variant Travel Document 2 or 3 line ID Cards auto-detect.
- Add Multiple Templates section to OCR chapter.
- Add Inverse OCR parameter.
- Add Separate Transmissions option to UPC/EAN/JAN Supplemental AIM ID
Format.
- Add Codabar Upper or Lower Case Start/Stop Characters Transmission.
- Change GS1 DataBar Limited default to Enable.
- Change Security Level default to 1.
- Replace ADF chapter content with a reference to the Advanced Data
Formatting Programmer Guide.
- Update Driver’s License Parsing text (jurisdictional updates no longer apply).
-05 Rev A 8/2014 - Add Wi-Fi Friendly Mode and Wi-Fi Friendly Channel Exclusion parameters.
- Add non-parameter attributes appendix.
- Update QR Code sample bar code.
-06 Rev A 12/2014 Zebra rebranding.
-07 Rev A 3/2015 Add Protocol appendix.
-08 Rev A 7/2015 Updated Zebra logo & copyright; fixed TOC link issue; updated 123Scan
2
URLs;
removed Glossary.
-09 Rev A 9/2015 - Removed SSI over USB CDC device type option and related note.
- Update Beep Directive and Bar Code Configuration Directive parameters.
- Removed Multiple Templates section from OCR chapter.
- Added Code 128, Code 39, and I 2 of 5 Security Levels.
- Added UPC Reduced Quiet Zone, Code 128 Reduced Quiet Zone, Code 39
Reduced Quiet Zone, I 2 of 5 Reduced Quiet Zone, 1D Quiet Zone Level.
- Added Ignore Code 128 <FNC4>.
- Added default for User-Programmable Supplementals.
- Changed I 2 of 5 and I 2 of 5 Lengths defaults.
- Added GS1 Data Matrix and GS1 QR code type parameters.
- Added Han Xin parameters and sample bar code.
Change Date Description