NATURAL SOURCE MAGNETOTELLURICS
May 2002 Section 13, Page 4
13.3 MT/AMT PROGRAM OPERATION
MENU 1:
In all of the following menu descriptions, the bold fields in the boxes are the parameters that can
be changed by the operator.
<— Robust processing menu for
Scalar and Vector only
The
key is active.
AMT 0538. Program name and version.
15 Mar 98. Date.
08:53:10. Time.
Robust Processing for scalar and vector data acquisition only.
Vector. There are two choices at this time:
Vector VEC (Scalar is a subset of vector)
Tensor TEN
The Vector AMT configuration is the default option, and is similar to vector CSAMT. The
scalar option (multiple E-fields and one H-field) can be used also in this mode, to run EMAP
style MT.
Remote Reference: ON. This switch enables or disables the remote reference option.
FFT window function: HANNING. Two window functions are provided in this
version: HANNING and RECTANGULAR (or BOX CAR). The HANNING window is the
AMT 0538 15 Mar 98 08:53:10
Vector AMT Remote Reference: ON
FFT window function: HANNING
Robust Processing: ON
Coherency Limit: .90
Outlier rejection: ON
Outlier rejection: 2.00 times median
Channel to monitor: 1
Gain Mode: VERY NOISY Units: Meters
Save data on disk: ON
CONTINUE: Next menu, ESCAPE: Prev. menu
To Next Page
Loading...
