GDP-32
II
INSTRUCTION MANUAL
May 2002 Section 18, Page 8
18.9 ANTENNA DESIGNATIONS
Antenna numbers are comprised of two parts - the antenna serial number, and the antenna or
calibration type:
NNNC
NNN antenna serial number
C channel number, antenna type or calibration type
Values for C:
0 Reserved for ANT/1 CSAMT antennas
1, 2 Reserved for dual axis AA antennas: 1 is channel 1, 2 is channel 2.
3 Reserved for AMT/CSAMT antennas, ANT/3
4 Reserved for MT antennas, ANT/4, EMI-BF4
5 Reserved for light-weight CSAMT antennas, ANT/5, UOII, UOIV
6 Reserved for Low Noise AMT antenna, ANT/6
9 Reserved for TEM antennas, TEM/3
7, 8 Not used at this time.
To Next Page
Loading...
