DATA, FILE AND PROGRAM TRANSFER
Section 7, Page 7 May 2002
7.3 ACCESSING CACHES
To access data caches from the Data Mode Main Menu press , Access Cache. This
displays the list of available caches:
Field Data Data Storage
Freq Domain Cal RPIP / CSAMT Board Calibrations
Time Domain Cal TDIP / TEM Board Calibrations
Antenna Cal CSAMT Antenna Calibrations
CR Calibrate CR / HACSAMT Board Calibrations
CR Antenna Cal CR / HACSAMT Antenna Calibrations
AMT Calibrate AMT / MT Board Calibrations
AMT Antenna Cal AMT / MT Antenna Calibrations
All field data (including system checks) are
sent to the Field Data cache (1). All
system calibrations are stored in both the
field data (1) and the calibration caches
(2,3,5,7). Antenna calibration data, loaded
from an external device, are stored only in
the antenna caches (4,6,8).
ER 320 Access Cache
Current: Field Data Remaining:10568KB
Parallel Port Disabled
1) Field Data Data Storage
2) Freq Domain Cal RPIP/CSAMT Board
3) Time Domain Cal TDIP/TEM Board
4) Antenna Cal CSAMT Antenna
5) CR Calibrate CR/HACSAMT Board
6) CR Antenna Cal CR/HACSAMT Antenna
7) AMT Calibrate AMT/MT Board
8) AMT Antenna Cal AMT/MT Antenna
Select Cache (1 – 8), or ESCAPE:
To Next Page
Loading...
