Zonge GDP-32 - Page 309

GDP-32
II
INSTRUCTION MANUAL
May 2002 Section 14, Page 4
14.2 PLOT SUMMARY FOR DIFFERENT DATA TYPES
TDIP
Linear Decay Plot
At least one block required
Multiple blocks are averaged
Error bars presented
RPIP
CP (complex plane) Plot
At least two different frequencies required
One data point plotted for each different frequency
Multiple blocks are averaged
No error bars
CR
CP (complex plane) Plot
At least one block required
Five data points (harmonics) plotted for each different frequency
Multiple blocks are averaged
No error bars
CSAMT
Log Resistivity vs. Log Frequency Plot
Linear Phase vs. Log Frequency Plot
Log Magnitude (E or H) vs Log Frequency Plot
At least two different frequencies required
One data point plotted for each different frequency
Multiple blocks are averaged
Error bars presented
TEM
Log Transient Decay vs Time Plot
Log Late-time Resistivity vs Depth Plot
At least one block required
Multiple blocks are averaged
Error bars presented
MT/AMT
Log Resistivity vs. Log Frequency Plot
Linear Phase vs. Log Frequency Plot
At least one band of data required
One data point plotted for each different frequency
Multiple blocks are averaged
Error bars presented